
Industry Solution
Dessalement de l’eau de mer
High-pressure seawater desalination membrane solutions for coastal industrial make-up water, island water supply and municipal backup sources.
Industry Challenges
High-TDS seawater, temperature fluctuation, biofouling risk and long-term pressure-resistance requirements.
Solution Design
AQUA/SORA series uses a pressure-resistant support layer and dense thickened skin layer, balancing high rejection (99.85%+) and stable operation.
Recommended Configuration
Process Design
Dessalement de l’eau de merRecommended Process
From raw-water pretreatment to product-water reuse and concentrate handling, this forms a complete technical route for further review.
Screening and Raw-water Conditioning
Remove floating matter and large particles while buffering tide, temperature and turbidity changes.
Coagulation Filtration / UF
Configure coagulation, filtration or UF barriers according to algae, colloids and turbidity.
Cartridge Filtration and Dosing
Control scaling and particle risk through fine filtration, antiscalant dosing and pH adjustment.
High-pressure SWRO
High-pressure pumps, energy recovery devices and seawater RO membranes work together for desalination.
Remineralization, pH and Disinfection
Apply remineralization and disinfection based on municipal or industrial make-up water targets.
Concentrate Discharge / Resource Recovery
Define diffusion discharge, reuse or further concentration routes according to environmental requirements.
Screening and Raw-water Conditioning
Remove floating matter and large particles while buffering tide, temperature and turbidity changes.
Coagulation Filtration / UF
Configure coagulation, filtration or UF barriers according to algae, colloids and turbidity.
Cartridge Filtration and Dosing
Control scaling and particle risk through fine filtration, antiscalant dosing and pH adjustment.
High-pressure SWRO
High-pressure pumps, energy recovery devices and seawater RO membranes work together for desalination.
Remineralization, pH and Disinfection
Apply remineralization and disinfection based on municipal or industrial make-up water targets.
Concentrate Discharge / Resource Recovery
Define diffusion discharge, reuse or further concentration routes according to environmental requirements.
Typical seawater RO process. Actual pretreatment, recovery and concentrate route should be reviewed against intake method, seasonal water quality and local discharge requirements.
More Solutions
More Solutions

Eau ultrapure électronique
Semiconductor, panel and photovoltaic manufacturing have very high requirements for ultrapure-water resistivity, TOC and particles.

Agroalimentaire et boissons
Beverage recipe water, process water and CIP cleaning water must balance hardness control, taste retention and hygiene standards.

Réutilisation des eaux usées textiles
Textile dyeing wastewater has high COD, deep color, and large salinity and temperature fluctuations, requiring multi-stage membrane separation for reuse.
Need to further confirm solution boundaries?
Provide feed-water quality, capacity and product-water targets to get selection advice for the current project.
