Daltonen
Electronics Ultrapure WaterSolutions

Industry Solution

Electronics Ultrapure Water

Semiconductor, panel and photovoltaic manufacturing have very high requirements for ultrapure-water resistivity, TOC and particles.

Recommended Membranes
PURE Brackish Water RO Series
MATE100 Nanofiltration Series
ULTRA Ultrafiltration Series

Solution Brief

Define the membrane solution from operating conditions

  Back to Solutions
01

Industry Challenges

Extremely low TOC, high resistivity, strict particle control and stable product-water consistency.

02

Solution Design

RO+NF+UF multi-stage membrane separation removes salts, organics and particles step by step, providing stable pretreated water for final polishing.

03

Recommended Configuration

PURE Brackish Water RO SeriesMATE100 Nanofiltration SeriesULTRA Ultrafiltration Series

Process Design

Electronics Ultrapure WaterRecommended Process

From raw-water pretreatment to product-water reuse and concentrate handling, this forms a complete technical route for further review.

UF
01 · Pretreatment

Multimedia filtration / UF

Remove suspended solids, colloids and microorganisms to protect downstream desalination.

Output: 稳定低浊进水
NF
02 · Hardness control

Softening / NF and fine filtration

Reduce hardness, alkalinity and scaling tendency to support higher recovery.

Output: 降低结垢风险
RO
03 · First-stage desalination

First-pass RO

Remove most dissolved salts, silica and organics to produce pre-desalinated water.

Output: 低 TDS 产水
RO
04 · Advanced desalination

Second-pass RO / EDI

Further reduce ionic loading to provide stable feedwater for ultrapure water polishing.

Output: 高Pure water基水
UV
05 · Final polishing

UV, mixed-bed resin and final UF

Control trace ions, TOC and particles to meet production requirements.

Output: 超Pure water
06
06 · Recirculating supply

Storage and distribution loop

Maintain stable water quality through continuous recirculation and point-of-use monitoring.

Output: 稳定到达用水点
Feed Side
Industrial Raw Water
Product Water Side
Electronics-grade Ultrapure Water
Concentrate / By-product
RO Concentrate / Regeneration Wastewater
Engineering Note

Specify ultrapure water polishing for the resistivity, TOC, boron, silica and particle requirements of the wafer, display or photovoltaic production line.

Need to further confirm solution boundaries?

Provide feed-water quality, capacity and product-water targets to get selection advice for the current project.

Contact Technical Team