Daltonen
Separation & PurificationSolutions

Industry Solution

Separation & Purification

Process concentration, separation, purification and resource recovery for fine chemicals, pharmaceuticals, new energy and food ingredients.

Recommended Membranes
MATE100 Nanofiltration Series
ULTRA Ultrafiltration Series
Custom specialty membranes

Solution Brief

Define the membrane solution from operating conditions

  Back to Solutions
01

Industry Challenges

Valuable target compounds and complex salts, organics, colour or solvents require a careful balance of rejection, flux and product stability.

02

Solution Design

Combine NF, RO, UF and customized membranes: remove particles and colloids first, then concentrate and purify by molecular weight, ionic valence or salt selectivity.

03

Recommended Configuration

MATE100 Nanofiltration SeriesULTRA Ultrafiltration SeriesCustom specialty membranes

Process Design

Separation & PurificationRecommended Process

From raw-water pretreatment to product-water reuse and concentrate handling, this forms a complete technical route for further review.

01
01 · Feed characterization

Confirm composition and targets

Confirm target compounds, impurities, salts, organic solvents, temperature, pH and recovery targets.

Output: 分离目标边界
02
02 · Pretreatment

Particle and colloid control

Use clarification, filtration or UF to reduce solids and colloids and protect selective membranes.

Output: 稳定膜前物料
UF
03 · Fractionation

UF / NF fractionation

Separate by molecular weight, ionic valence or organic composition to minimize target-compound losses.

Output: 目标组分富集液
NF
04 · Concentration and desalting

NF / RO Deep Concentration

Set concentration factors according to osmotic pressure and thermal sensitivity to reduce evaporation or drying loads.

Output: Concentration液 / 透过液
05
05 · Quality validation

Validate flux and rejection

Validate long-term flux, cleaning recovery, target rejection and batch consistency.

Output: 工艺Parameters建议
06
06 · Resource recovery

Mother-liquor reuse and byproduct handling

Combine evaporation, crystallization or blending downstream to recover materials and reduce liquid waste.

Output: 资源化路径
Feed Side
Process feed
Product Water Side
Enriched / purified stream
Concentrate / By-product
Mother liquor / permeate
Engineering Note

For separation and purification projects, bench or pilot testing should validate target rejection, fouling trends, cleaning recovery and continuous operating stability.

Need to further confirm solution boundaries?

Provide feed-water quality, capacity and product-water targets to get selection advice for the current project.

Contact Technical Team