Daltonen
Seawater desalinationSolutions

Industry Solution

Seawater desalination

High-pressure seawater desalination membrane solutions for coastal industrial make-up water, island water supply and municipal backup sources.

Recommended Membranes
AQUA / SORA Seawater Desalination Series
PRO Anti-fouling Series

Solution Brief

Define the membrane solution from operating conditions

  Back to Solutions
01

Industry Challenges

High-TDS seawater, temperature fluctuation, biofouling risk and long-term pressure-resistance requirements.

02

Solution Design

AQUA/SORA series uses a pressure-resistant support layer and dense thickened skin layer, balancing high rejection (99.85%+) and stable operation.

03

Recommended Configuration

AQUA / SORA Seawater Desalination SeriesPRO Anti-fouling Series

Process Design

Seawater desalinationRecommended Process

From raw-water pretreatment to product-water reuse and concentrate handling, this forms a complete technical route for further review.

01
01 · Intake Pretreatment

Screening and Raw-water Conditioning

Remove floating matter and large particles while buffering tide, temperature and turbidity changes.

Output: Stable Intake Load
UF
02 · Fine Pretreatment

Coagulation Filtration / UF

Configure coagulation, filtration or UF barriers according to algae, colloids and turbidity.

Output: Lower Turbidity and SDI
03
03 · Membrane Protection

Cartridge Filtration and Dosing

Control scaling and particle risk through fine filtration, antiscalant dosing and pH adjustment.

Output: Stable Pre-membrane Water Quality
SWRO
04 · Core Desalination

High-pressure SWRO

High-pressure pumps, energy recovery devices and seawater RO membranes work together for desalination.

Output: High-rejection Permeate
05
05 · Product-water Conditioning

Remineralization, pH and Disinfection

Apply remineralization and disinfection based on municipal or industrial make-up water targets.

Output: Meet Water-use Specifications
06
06 · Concentrate Management

Concentrate Discharge / Resource Recovery

Define diffusion discharge, reuse or further concentration routes according to environmental requirements.

Output: Compliant Concentrate Disposal
Feed Side
Seawater
Product Water Side
Desalinated Water / Industrial Make-up Water
Concentrate / By-product
Seawater Concentrate
Engineering Note

Typical seawater RO process. Actual pretreatment, recovery and concentrate route should be reviewed against intake method, seasonal water quality and local discharge requirements.

Need to further confirm solution boundaries?

Provide feed-water quality, capacity and product-water targets to get selection advice for the current project.

Contact Technical Team