Daltonen
Textile Wastewater ReuseSolutions

Industry Solution

Textile Wastewater Reuse

Textile dyeing wastewater has high COD, deep color, and large salinity and temperature fluctuations, requiring multi-stage membrane separation for reuse.

Recommended Membranes
PRO Anti-fouling Series
NANO High-pressure NF Series

Solution Brief

Define the membrane solution from operating conditions

  Back to Solutions
01

Industry Challenges

High COD, deep color, salinity fluctuation and high-temperature feed water.

02

Solution Design

Anti-fouling RO plus high-pressure NF: PRO series lowers cleaning frequency, while NANO series handles high-hardness and high-sulfate stages.

03

Recommended Configuration

PRO Anti-fouling SeriesNANO High-pressure NF Series

Process Design

Textile Wastewater ReuseRecommended Process

From raw-water pretreatment to product-water reuse and concentrate handling, this forms a complete technical route for further review.

01
01 · Flow and quality equalization

Equalization and cooling

Balance pH, temperature, colour, salinity and COD fluctuations to reduce shock loads.

Output: 稳定综合废水
MBR
02 · Primary treatment

Physicochemical + biological treatment / MBR

Remove dyes, suspended solids and biodegradable organics to reduce membrane fouling loads.

Output: 深度处理进水
UF
03 · Membrane pretreatment

UF and fine filtration

Retain colloids and fine particles to provide stable feedwater to fouling-resistant RO.

Output: 低浊低 SDI 水
RO
04 · Desalination for reuse

Anti-fouling RO

Remove dissolved salts and residual organics; reuse permeate for rinsing or process makeup.

Output: Production Reuse Water
NF
05 · Concentrate volume reduction

NF / high-pressure RO

Separate salts or further concentrate the stream according to its composition, reducing disposal volumes.

Output: 高浓度浓水
06
06 · Final treatment

Reuse / evaporation and crystallization

Return permeate to production and further treat concentrate to discharge or near-ZLD targets.

Output: Reuse与合规处置
Feed Side
Integrated Textile Dyeing Wastewater
Product Water Side
Production Reuse Water
Concentrate / By-product
High-salinity Concentrate / Sludge
Engineering Note

Textile wastewater varies with dyes, sizing agents, auxiliaries, temperature and salinity. Water analysis and bench testing are recommended before membrane treatment.

Need to further confirm solution boundaries?

Provide feed-water quality, capacity and product-water targets to get selection advice for the current project.

Contact Technical Team