Daltonen

DALTONEN

NF Nanofiltration membranes

Nanofiltration supports selective separation, water softening, organic removal and process concentration. Series cover drinking water, industrial salt separation, food and beverage and process liquids; rejection depends on the fluid and operating conditions.

MATE100 Nanofiltration Series

DA-MATE100

MATE100 Nanofiltration Series

Designed for selective monovalent/divalent salt separation, removing TOC, THM precursors, pesticides and organics while lowering hardness and retaining some beneficial ions.

Food and beverage / Drinking Water Softening / Textile Dyeing Wastewater / Process separation

Salt rejection
NaCl 85-95% / MgSO₄ ≥99%
Permeate flow
1400-9500 gpd
Operating pressure
0.48 MPa
NANO High-pressure NF Series

DA-NANO

NANO High-pressure NF Series

Suitable for high-hardness, high-sulfate and high-organic industrial wastewater, maintaining selective separation under high TDS and high COD.

Mine Water Treatment / Textile Dyeing / Landfill leachate / Industrial Concentration

Salt rejection
MgSO₄ ≥98%
Permeate flow
1600-7000 gpd
Operating pressure
0.76 MPa
MATE300 Nanofiltration Series

DA-MATE300

MATE300 Nanofiltration Series

Low-pressure, high-flux design for softening, concentration and separation of organic salts, natural products and fermentation broths.

Water softening / Process concentration / Natural product separation / Fermentation broth processing

Salt rejection
MgSO₄ ≥97%
Permeate flow
2100-10600 gpd
Operating pressure
0.48 MPa
HSNF High-Temperature Nanofiltration Series

DA-HSNF-8400 / 8380

HSNF High-Temperature Nanofiltration Series

For food and beverage separation, sugar-alcohol purification and demineralization at reference operating temperatures up to 70°C, with sanitary circulation and CIP compatibility.

Monosaccharide/disaccharide separation / Oligosaccharide purification / Sugar-alcohol purification / Food and beverage demineralization

Salt rejection
99.6%
Permeate flow
2000-9000 gpd
Operating pressure
150 psi

Get selection advice

Provide ionic composition, hardness, organics, pH, temperature and target separation. For process liquids, confirm compatibility, product value and concentration targets, using a pilot test where needed.

Contact a Technical Consultant