Daltonen

DALTONEN

RO Reverse osmosis membranes

Reverse osmosis membranes remove dissolved salts and impurities in seawater desalination, brackish water treatment, industrial pure water and wastewater reuse. Compare series by feed salinity, fouling risk and permeate requirements.

AQUA / SORA Seawater Desalination Series

DA-AQUA / DA-SORA

AQUA / SORA Seawater Desalination Series

Designed for seawater and high-salinity brackish water desalination, using a pressure-resistant support layer and dense thickened skin layer for high rejection, pressure resistance and long-term stability.

Seawater desalination / Coastal Industrial Make-up Water / High-salinity Groundwater

Salt rejection
99.85-99.87%
Permeate flow
6000-9000 gpd
Operating pressure
5.5 MPa
PURE Brackish Water RO Series

DA-PURE

PURE Brackish Water RO Series

Suitable for low-pressure operation and industrial high-salinity wastewater treatment, providing stable rejection of difficult solutes such as TOC and SiO2.

Boiler Make-up Water / Industrial pure water / High-salinity Wastewater Pretreatment

Salt rejection
99.70%
Permeate flow
2650-11000 gpd
Operating pressure
1.55 MPa
PRO Anti-fouling Series

DA-PRO

PRO Anti-fouling Series

Reduces pollutant adsorption through surface-charge and hydrophilic-interface control, suitable for complex water, industrial wastewater reuse and reclaimed water reuse.

Chemical Reuse Water / Electroplating Wastewater Reuse / Municipal Reclaimed Water Reuse

Salt rejection
99.75%
Permeate flow
2050-11400 gpd
Operating pressure
1.55 MPa
BUFF High-rejection Anti-fouling Series

DA-BUFF

BUFF High-rejection Anti-fouling Series

For high-salinity industrial wastewater and demanding reuse projects, balancing high rejection, anti-fouling performance and stable permeate.

Petrochemical / Mine Wastewater / High-salinity Wastewater Reuse

Salt rejection
99.75%
Permeate flow
2050-11500 gpd
Operating pressure
1.55 MPa
ZOOM Advanced Fouling-Resistant RO Series

DA-ZOOM

ZOOM Advanced Fouling-Resistant RO Series

Dual fouling-resistant surfaces and wide feed channels reduce deposits in high-COD, high-TOC feeds for leachate treatment and industrial wastewater reuse.

Coal-chemical wastewater / Landfill leachate / Industrial wastewater reuse

Salt rejection
99.70%
Permeate flow
2050-11000 gpd
Operating pressure
1.55 MPa
ECO Low-Energy RO Series

DA-ECO

ECO Low-Energy RO Series

Stable separation at low pressure for brackish-water desalination, industrial process water and energy-saving upgrades to pure-water systems.

Brackish-water desalination / Industrial process water / Energy-saving pure-water system upgrades

Salt rejection
99.50%
Permeate flow
2250-12650 gpd
Operating pressure
1.03 MPa
HSRO Sanitary Heat-Sanitizable RO Series

DA-HSRO

HSRO Sanitary Heat-Sanitizable RO Series

Sanitary Full-fit construction supports heat sanitization up to 85°C for pharmaceuticals, premium cosmetics, nutraceuticals and alternatives to distillation.

Pharmaceutical high-purity water / Cosmetics process water / Nutraceutical process water

Salt rejection
99.6%
Permeate flow
2000-9000 gpd
Operating pressure
1.03 MPa

Get selection advice

Check feed TDS, temperature, SDI, residual chlorine and scaling risk, then verify operating pressure, permeate flow, recovery and cleaning conditions. Refer to each product page and project-specific documentation for confirmed limits.

Contact a Technical Consultant